Mepaco Blog

Compare EP Food Contact Surfaces under 200X Magnification

Tue, 05 Jan 2021 14:31:00 GMT

Apache routinely conducts tests for customers and in-house studies on the benefits of electropolished surfaces on food contact surfaces.

Highlighted above, is a study that compares high-end finishes under 200X magnification:

304 Stainless Steel Bead Blast Finish with readings from 35 – 45 RA
304 Stainless Steel 2B + Electropolished Finish with reading from 5 – 6 RA
304 Stainless Steel 2B Finish (12-gauge material) with reading from 15 – 17 RA
304 Stainless Steel 2B Finish (10-gauge material) with reading from 20 – 30 RA

It shows the RA (Roughness average) reading in four finish examples of 304 stainless steel. In the study, the electropolished finish is more than six times smoother that the bead blasted finish.

What makes this study significant is that food processors can leverage electropolished surfaces to increase food safety performance. Our customer’s who choose electropolished food contact surfaces tell us that food safety is significantly enhanced, and sanitation efficiencies are realized in time savings and water usage.

What is Your Stainless Finishes IQ?

Tue, 28 Jul 2020 16:10:00 GMT

RMS (Root Mean Square) is a standard used to diagnose machining operations and surface finish. The fineness of the finish and ultimate success of sanitation effectiveness is called RA, the roughness average, measured by height in millionths of an inch or microinches.

A profilometer device determines RA values of small surface variations and calculates their average to determine roughness.

In terms of material used in food processing and commercial equipment, here is the list of stainless materials from smoothest to the roughest RA range.

Electropolished surfaces range from 6 RA – 14RA microinches. Electropolishing can change RA values up to 50% smoother, depending on the material being treated.

2B Mill Finish – This is a widely used stainless steel finish, common in industrial, chemical and food applications. It is corrosion resistance and has a typical range from 15RA (16 gauge) – to 40 RA (7 gauge) microinches.

No. 4/Dairy Finish – For processing industries, the Dairy finish is required to meet the basic 3-A standards. It uses a 180 grit and has an RA range of 18-31 microinches.

No. 4 Finish – This finish uses a 150-grit abrasive creating a polished brushed surface. The RA range is 29-40 microinches.

No. 3 Finish – The No. 3 finish uses a 120 grit abrasive. It has a semi-polished finish with an RA range of 36 – 58 microinches.

Bead Blasted surfaces have a soft satin appearance and low reflection. The process of bead blasting utilizes bead material such as glass or ceramic beads to produce a non-directional, textured surface. The finer the blasting media, the more corrosion resistance the surface performance. The RA values are typically higher than 45RA microinches, but are dependent on the blasting process and the stainless material.

Improve your Stainless Finishes IQ; read our complimentary e-book.

The Meat Attachment Test Results Are In

Mon, 29 Jun 2020 21:28:36 GMT

We recently designed an in-house meat attachment test to determine performance of stainless finishes used in processing equipment. In a device designed by our technicians, we tested an electropolished panel on the left, a pickle passivated panel in the center and a bead blasted panel on the right. The 70% lean beef patty with an internal temperature of 44 degrees, was placed on each of the stainless finish examples, and the mechanism was tilted to at least 90 degrees.

The video will show that the electropolished sample demonstrated the least meat attachment.

Mepaco, part of the Apache Stainless family, offers mechanical and chemical finishing in-house. Many customers specify our high-performance finishes to reduce food safety risk and to create sanitation efficiencies.

Contact our sales and application experts for more information.

Comparing Metal Finishes used in Sanitary Design Equipment

Tue, 18 Oct 2016 15:14:00 GMT

In the photo are samples that we provide to customers to show the different types of finishes available in the design and manufacturing of equipment for industries that require a high degree of sanitation.

From the left:

2B Finish: Has common corrosion resistance properties, heat resistant, smooth (not brushed) steel. The RA (roughness average) is 36 to 15 depending on the gauge of the material.

#4 Finish: Is Characterized by short, polished brushed lines and is suitable for caustic wash down procedures. The RA is from 29 – 40 depending on the gauge of the material.

Pickle Passivation: A treatment also referred to as descaling, pickle passivation removes the scale and leaves a matte finish that is free from contamination. Apache’s tests have proven an increase in RA smoothness up to 25%, compared to measurements before the material was pickle passivated.

Bead Blast: Bead blasting utilizes material such as glass, ceramic beads to produce a non-directional, textured surface with a satin appearance and low reflectivity. The finish is not necessarily smooth, depending on the process and blasting medium. RA readings are typically greater than 45.

Electropolish: Surface metal is dissolved, removing all embedded contaminants, which creates a smooth, mirror-like finish. Apache’s tests have proven to increase smoothness up to 50%, compared to measurement before the material was electropolished.

For detailed information about these finishes and processes, download our white paper “Leveraging Stainless Steel Finishes on Sanitary Equipment”.